Classic American cars

Archive for the ‘Parts for Sale’ Category

« Older Entries
Newer Entries »

OFFENHAUSER INTAKE AND DUAL FOUR BARREL CARTER COMPETITION CARBURETTORS

FOR SALE

SUPERB OFFENHAUSER ALUMINIUM INTAKE MANIFOLD FOR SMALL BLOCK CHEVROLETS UP TO 1986 OR LATER IF FITTED WITH EARLIER HEADS WITH PERIMETER BOLT VALVE COVERS.

COMPLETE WITH MATCHED DUAL CARTER COMPETITION 4761S 500cfm CARBURETTORS.

The carburettors have been stripped, cleaned and the steel parts plated then rebuilt.

The Offenhauser 5253 intake has been bead blasted and is in immaculate condition with no corrosion anywhere.

It’s a beautiful low rise intake for dual four barrels, fits 265, 283, 305, 327, 350, 377, 383 and 400ci.

Share

USED CAST INTAKES FOR SALE * CHEVROLET * PONTIAC * FORD * CHRYSLER

USED CAST INTAKE MANIFOLDS FOR SALE, AS THEY WERE REMOVED FROM VARIOUS ENGINE, IN NEED OF BLASTING AND PAINT.
__________________________________________________________________________________________________________________

SMALL BLOCK CHEVROLET

Casting Date Year Cubic Horse
Number Code Inch Power
6263751——-E152——1972————350CI
340261 H80 1974/76 350 250HP
346249 8B0 1980 305/350
346250 I135 1975 305/350
3973469 O11 1971 350 270HP
3973469 H80 1970 350 270HP
3927184 I138 1968 350 255/300/350HP
3844459 F274 1964 327 300HP FITS CARTER AFB
3746286 K1262 1962 265/283 WITH OIL FILL TUBE 2BBL
3919801 F127 1967 307/327 WITH OIL FILL TUBE
10166133 3327 1987 TO 1995 350/305 TBI aluminium
14102182 8302 1990 TO 1992 305 TBI aluminium

____________________________________________________________________________________________________________
FORD
D7TE 9425 SA 8815 351/400M 2BBL
C60E 9425 B D25 289 HI-PO 4BBL
C9ZE 9425 B 9D14 390 FE 4BBL
C5AE 9425 ?25 352 FE 2BBL
CC2AE 9425 2B6 352 FE 2BBL
_____________________________________________________________________________________________________________
PONTIAC

9786286 A107 1967 GTO 400
_____________________________________________________________________________________________________________
BUICK

B 1236403 B27 1971 455 STAGE 1 4BBL
R 1231718E C24 455 GS 4BBL NO EGR
_____________________________________________________________________________________________________________
CHRYSLER

3830733-2 05110 1976 TO 1980 440 B&C BODY

_____________________________________________________________________________________________________________

We also have an iron bell housing for 318 / 340 / 360 Chrysler / Plymouth / Mopar

Casting number 3497270, casting date I 15 1 so probably September 15th 1971.

Fits 3 and 4 speed transmissions

______________________________________________________________________________________________________________

Share

BUICK OIL PUMP COVER by TA PERFORMANCE TA 1512

BUICK OIL PUMP COVER AND OIL COOLER/REMOTE FILTER TAKE OFF
BILLET ALUMINIUM WITH RED ANODISED FINISH.

TA PERFORMANCE DESCRIPTION.
High flow billet oil pump cover to allow the use of a remote oil filter. This cover replaces the stock restrictive filter housing and will increase volume and pressure substantially and free up additional horsepower.Requires an external pick up to the oil pan. Features 1/2 inch NPT Inlet and Outlets, a 3/8 inch NPT Bypass. Unique TA features are additional inlet and outlet oil passages for increased volume and a design that prevents the pump from losing its prime, unlike our competitor’s Scavenger pump covers.
£200 PLUS SHIPPING ONO

Share

1972 NEW PROCESS MOPAR 3 SPEED TRANSMISSION PP230 A-230

FOR SALE

NEW PROCESS A-230 3 SPEED MANUAL TRANSMISSION

£100

WE POSSIBLY HAVE AN IRON BELL HOUSING TO GO WITH IT (AT ADDITIONAL COST).

Share

VALVE COVERS, STEEL AND ALUMINIUM HOLLEY M/T CHEVROLET PONTIAC

Lots of valve covers available, pressed steel and aluminium.

Share

INTAKE MANIFOLDS: EDELBROCK : GM : WINTERS : PONTIAC : CHEVROLET : HOLLEY: TORKER

Edelbrock Performer Intake

2101

In good condition, all threads good.

Bead blasted

Fits SBC 265, 282, 305, 327, 350, 383, 400 up to 1986 and later if fitted with earlier heads with perimeter bolt valve covers.

______________________________________________________________________________________________________________________________

GM 458520 aluminium intake manifold

Originally for the L82 Corvette

1975 ? Date code is 11/5/2

Very nice condition

Fits SBC up to 1986

Takes Quadrajet spreadbore 4 barrel carburettor.

___________________________________________________________________________________________________________________

HOLLEY STREET DOMINATOR Single plane intake for Small Block Chevrolet, all threads are good and it has been aluminium oxide blasted and then bead blasted to finish it off, looks very very good, intake manifold gaskets are available, ready to fit and go.

A lovely performance manifold for the Small Block Chevrolet, will fit 283, 305, 327,350, 383 and 400 cubic inch up to 1986.

£100 plus shipping, collection from Norwich welcome

__________________________________________________________________________________________________________________

The CHEVROLET 3972110 is a production 1970 only intake for Corvette, Yenko Nova and Z28 Camaro with LT1 350ci 360 AND 370 horse motors.

This intake has NO hole in the front for the oil filler tube.

This intake has been repaired around the small heater water outlet, it was cracked as quite a lot of them are, it is very common for them to crack when the steel hose adaptor is removed from the aluminium intake.

It has been professionally welded and re-tapped/threaded.

___________________________________________________________________________________________________________________

EDELBROCK INTAKE FOR BIG BLOCK CHEVROLET WITH RECTANGULAR PORT HEADS.

TR2X TUNNEL RAM BOTTOM SECTION WITH TR4X TOP SECTION TO TAKE ONE FOUR BARREL CARBURETTOR.

TOP CAN BE REMOVED AND CHANGED FOR A DUAL CARB’ SETUP TOP SECTION.

BEAD BLASTED AND CLEANED, ONE WATER OUTLET REPAIRED AND A HOLE IN THE LIFTER VALLEY COVER SECTION WELDED WHERE IT MAY HAVE BEEBN DRILLED FOR A PCV VALVE?

£250 plus shipping

___________________________________________________________________________________________________________________

PONTIAC GTO 1967 CAST IRON INTAKE

Casting number 9786286
Casting date January 10th 1967
__________________________________________________________________________________________________________________

PONTIAC 4 BARREL INTAKE 1977
525355 CASTING NUMBER
March 25th 1977 casting date
___________________________________________________________________________________________________________________

Share

CRANKSHAFTS: SMALL BLOCK CHEVROLET: FORGED: CAST: ONE PIECE SEAL: TWO PIECE SEAL: STROKER

A selection of new and used crankshafts for sale.

3932442 casting number for 305 & 350 small block Chevrolet with 2 piece rear seal, several in stock, can be supplied with bearings ready to fit.

Although 305 and 350 share the same cast crankshaft casting number they are not the same, they are balanced differently to allow for the lighter weight 305 pistons.

The 305 and 350 cranks should not be interchanged.

3951529 cast crankshaft for 400 small block Chevrolet. 2 available

3941174 cast crankshaft for 307 and 327ci small block Chevrolet.

14088526 cast crankshaft for 305 and 350ci small block Chevrolet, 1 piece rear seal, at standard and ready to use.

14088535 Cast crankshaft for 350 small block Chevrolet, from ZZ4 motor with 1 piece rear seal, at 10/10 and ready to use.

EAGLE 3,75″ stroker cast crankshaft for 350ci to make 383ci small block Chevrolet, used, balanced, polished journals still at standard and it is ready to use, excellent condition.

EAGLE cast stroker crankshaft for 350ci to make 383ci small block Chevrolet, new and still in the box.

97954 350 Pontiac crankshaft, journals need a polish otherwise it’s good to use as it is. At standard.

Share

CONRODS, STOCK GM, PM RODS, SCAT, MANLEY, CHEVROLET, PONTIAC, BUICK, EAGLE

Numerous sets of Conrods for sale.

If you are using conrods with press fit wrist pins we can fit your pistons to the rods for you if required.
—————————————————————————————————————————–
Set of 8 MANLEY aluminium 5.700 small block CHEVROLET con rods in excellent shape. 7/16″ rod bolts

———————————————————————————————————————————–
Set of 8 stock GM Chevrolet 5.565″ conrods for 400ci small block Chevrolet, resized, new ARP rod bolts, ready to use.

———————————————————————————————————————————–
Stock 5.7″ small block Chevrolet conrods for 283, 302, 305, 307, 327, 350 and 383ci engines. Ready to use, available with standard or ARP rod bolts.

———————————————————————————————————————————–

Set of 8 matched forged custom Howards con rods 5.850″ long for 350 and 383 Chevrolet applications. (standard 350 rod length is 5.700″)

Can only be used with custom matching pistons because of the extra length.

Ready to fit and use.

£150 plus shipping

———————————————————————————————————————————–

Matched set of 8 GM Chevrolet ‘Powdered Metal’ conrods, prepped and resized in the USA, ready to fit and use.

Very nice rods with quality rod bolts.

Press fit wrist pin.

£150.00 plus shipping

———————————————————————————————————————————–

Nice set of 8 GM Chevrolet ‘Powdered Metal’ conrods in excellent condition. Ready to use.

£125 plus shipping

———————————————————————————————————————————–

One set of 8 SCAT ‘H’ beam conrods for big block Chevrolet. New bushes fitted to wrist pin end, very good quality rods with little use.
Stock big block CHEVROLET length of 6.135″.
For stock crank journal diameter and 0.9898″ wrist pin.
Good rods, suitable for up to 850hp.
Rod number 2357S

£150 the set plus shipping.

———————————————————————————————————————————–

Set of 8 Pontiac 350, 400, 455 conrods, resized and with ARP rod bolts fitted.
———————————————————————————————————————————–

Set of 8 Buick 455 rods, resized and with ARP rod bolts fitted.
———————————————————————————————————————————–

Share

STEEL CHROME VALVE COVERS FOR SMALL BLOCK CHEVROLET

Chrome steel valve covers for small block CHEVROLET with perimeter bolts.

Standard height.

With baffles

Supplied with grommets for breather/oil fill and PCV

Valve cover gaskets also available

Share

DAMAGED ENGINE BLOCKS * HEADS * TRANSMISSIONS * 1971 PONTIAC FRONT END * PRINCE * SIGN OF THE TIMES* 1971 PONTIAC FRONT

SEVERAL USED ENGINE BLOCKS AVAILABLE TO MAKE INTO A COFFEE TABLE OR USE FOR SET UP.

CHEAP TO CLEAR, THEY GOTTA GO, WE ARE RUNNING OUT OF ROOM AND IT WOULD BE A SHAME TO SEND THEM TO THE SCRAP YARD.

CHEVROLET 283 CRACKED BLOCK

VARIOUS CHEVROLET CRACKED HEADS, VALVE COVERS, CRANKSHAFTS, CON RODS, PISTONS AND CAMSHAFTS ALSO AVAILABLE

ALSO A FEW TRANSMISSION CORES FOR REBUILD OR USE FOR SETUP, CHEAP TO CLEAR.
——————————————————————————————————————————————–

GARAGE ART
____________

1971 PONTIAC GRAND PRIX FRONT BUMPER, PAINTED SILVER WITH A BLUE FRONT PANEL WITH CHROME GRILLE COMPLETE WITH HEADLIGHTS AND INDICATORS AND A CHROME REAR BUMPER FOR GARAGE ART, ALL FOR SALE. (CHROME GRILLE IS BROKEN BUT REPAIRABLE) As used on the PRINCE album cover for SIGN OF THE TIMES in 1987 !

Share
« Older Entries
Newer Entries »